Volume shape extracting wet-wipes machinery

Brief introduction of products:
Shape: Volume shape with tear up line in a certain distance.
Packing type: Plastic round barrel or square shape pot. The wet-wipes products are the volume shape, with the dashed line spot. 50 pieces/volume, 60 pieces/volume, 80 pieces/volume, 120 pieces/volume and so on. We extract the wet tissue one by one from the center of the volume.
Products in different uses: The baby wet tissue, the hygienic clean wet tissue, the medicine wet tissue, clean skin wet tissue, the industrial clean the wet tissue, the computer clean wet tissue, disinfected wet turban, the degreasing wet tissue, scratches glass wet tissue, scratches floor wet tissue, pet clean wet tissue and so on.
 
Brief introduction of the equipment:
One of the equipments: Ordinary volume shape extracting wet-wipes machinery (2 sets) .

1. Non-wovens wet tissue perforating rewinder

Brief introduction:
This machine is mainly used in processing: in the middle of the volume shape is the extracted wet-wipes, especially suitable for the no core volume shaped products.

Production craft:
materials onto the machine→perforating→gathering the volume→stopping machine by counting number→getting materials by man→take to the saw→products→transfer the materials to the spraying machine.

Equipment characters:
We promoted the function of the machine according to customers’ advises, and now, our machine has these characters:
1. Precisely perforate, reduce the error of leaning degree.
2. Adjustable volume’s tension degree which can manufacture the highly tensioned products.

Equipment disposition:
1. Mitsubishi or Panasonic frequency changer.
2. Spiral perforating system, trimming system.
3. Pneumatically putting materials system.
4. Volume tensity vernier system.
5. 3450 type standard cutting machine and special plate which is made by stainless still.
6. Automatically counting system.
7. The requests of surface process: parts that touched to cloth use anti-rust materials. The body of the machine use car paint.

Technical parameters:
Name: Non-wovens wet tissue perforating rewinder
Model: YWJ-SZ-T1800
Product size: height14.8-15.8×60-180pieces/volume×150-240mm/
pieces（adjustable）
Perforating parameters: Spiral perforating, adjustable angle.
Suitable materials: 25-160g/㎡ water-sting materials.
Breath: ≤Φ1200mm×breath≤1800mm
Raw materials paper inside core diameter: Φ 76.2mm (=3")
Process ability: 150meters/min.
Total power: 380V ,50HZ ,3.7 kw
Weight: 1200 kg + 600kg
Machine size: main machine: L 3200×W 2200×H 1500mm
Auxiliary machine: L 2000×W 1500×H 1600mm
Delivery dimensions: L 2500× W1900 ×H1900mm, L 2500× W1900 ×H1900mm



　

2. Tube-shape sealing machine
　

Brief introduction:
This machine is assisted equipment for tape-shape wet wipes machine(non-woven perforating machine) which is mainly used in adding liquild and sealing for rolled tube-shape wipes.

Production Process:
Rolled non-woven wipes onto transport beltadding liquild at a certain amountsealingpassingscrewing cap by man power

Equipment disposition:
1.  Membrane hot sealing cutting system,including menbrane tension installment,covering menbrane installment Detection of positioning sensors.
2.  Heating / temperature control components, Sealing device rack,holding-cup device,hot sealing board and sealing head, membrane cutting device,hot sealing cutting devices and plastic devices are used pneumatic installment. The production process is hardly to have a broken membrane.
3.  Drive traction system and templates tension installment,including Drive motor / deceleration / transmission device composed of a step system in a straight line, traction drive chain / guides, action positioning devices, templates / bracket, the mold must depth to ensure that the production requirements.
4.  Electrical control system. Wiring reasonable norms and beautiful.
5.  Pneumatic system: triple by aerodynamic pieces, electronically controlled valve, gas and road joints and other components.
6.  Rack and the main material: the equipment rack welded carbon steel used by anti-rust paint processing, outsourcing stainless steel plate. Liquild-adding buckets and boards are made of stainless steel materials with excellent preservation of corrosion.Seal-appearance on the Teflon non-stick spray coating. The other components of equipment is in line with the health requirements of the materials.
7. The sealing Cutting device and the appearance shaping device, from top to bottom in the height of 5 cm (including 5 cm) of the adjustment can be arbitrary. To ensure that a various production of Tube-shape sealing machine.

Technical parameters:
Equipment name: Tube-shape sealing machine
Model: YWJ-SG-A
Tube volume: 50ml-400ml
Tube specifition: Φ60-150mm，height80-220mm（option）
Processing ability: 1600 tubes/hour
Gas source pressure: ≥ 0.5Mpa
Compressed air consumption: ≥ 0.3M3/min
Total power: 380V，50HZ，2kw
Weight: 400 kg
Machine size: 2200×600×1800mm
Packing size: 2400×800×2000mm




　

Warmly welcome to visit our factory and test our machines.
　

FAX: +86-518-85164005       MOB: +86-15961396591    TEL: +86-518-85968660